Power gas discharge tube (GDT) P600G
P600G
outdoor and indoor use
P600G -a power gas discharge tube (GDT) designed for potential equalisation on the installation components of buildings or technological units, which are not electrically connected to each other (according to EN 62305: 2011). It is recommended primarily for bridging of insulated flanges and insulated threaded joints in the pipeline cathodic protected parts of industrial technology. If between these parts arise some potential difference greater than 600V, GDT immediatelly ignites for a temporary period and both parth electrically interconnects (typical internal resistance initialized P600G is 0,001 ÷ 0,002 Ω). P600G installation can be done both inside and outside buildings, in damp and underground spaces. P600G functional part is made using a special gas dischage tube with shortened response time 20 nsec, designed for lightning current 100 kA (10/350). On the outer insulating cover is used a blue silicone rubber, which is hydrophobic and has excellent resistance against weathering, pollution and UV rays. Mounting bracket, connecting bolts and nuts are made from stainless steel, suitable for connection of conductors with cross section 16-50 mm2 Fe (Cu). The product is delivered with an integrated bracket, allowing direct mounting of P600G to the protected metal structure (pillar, wall or flange).
| Označení | P600G | |
| Klasifikace dle ČSN EN 61643-11 ed.2: 2013 a IEC 61643-11 | Typ 1 | |
| Stejnosměrné zapalovací napětí | UVDC | 600 V ÷ 1000 V |
| Max. trvalé pracovní napětí 50 Hz | Uc | 255 Vrms |
| Jmenovitý výbojový proud (8/20) | In | 100 kA |
| Impulzní bleskový proud (10/350) | Iimp | 100 kA |
| - náboj | Q | 50 Asec |
| - specifická energie | Ω/R | 2500 kJ/Ω |
| Zhášecí následný proud při Uc | Ifi | 100 Arms |
| Ochranná úroveň při při Iimp 1) | Up | < 1 kV |
| DC výbojový proud, 1 operace | 400 A/0,5 sec | |
| AC výbojový proud při 1200 Vrms (TOV)2), 1 operace | 300 Arms/0,2 sec | |
| Doba odezvy1) | tA | < 20 ns |
| Izolační odpor při 100 VDC | Riso | > 1 GΩ |
| Krytí | IP65 | |
| Pracovní teplota | - 40 °C ÷ + 90 °C | |
| Celková výška včetně konzoly | h | 187 mm |
| Hmotnost | m | cca 700 g |
| Zapouzdření | silikonový kaučuk | |
| Životnost | min 100 000 hod | |
| Katalogové číslo | 50802 | |
| 1) Typická hodnota 2) TOV – Temporary over voltage |
||
Advantages:
1) Product P600G is maintenance-free, has very little reaction time (20nsec), high insulation resistance (>1GΩ) and high protective ability. Next is this product resistant against to harsh treatment, acid rain and mechanical damage.
2) To perform diagnostics it is recommended to use measuring instrument G-TESTER (supplier ACER VOLTAGE s. r. o.). This device allows to control the one hand, the DC spark over voltage of the built GDT, then the value of the insulation resistance Risol (from 25VDC up to 1000VDC).