Power gas discharge tube P600GI


P600GI

indoor use

P600GI -a power gas discharge tube (GDT) designed for potential equalisation on the installation components of buildings or technological units, which are not electrically connected to each other (according to EN 62305: 2011). It is recommended primarily for bridging of insulated flanges and insulated threaded joints in the pipeline cathodic protected parts of industrial technology. If between these parts arise some potential difference greater than 600V, GDT immediatelly ignites for a temporary period and both parth electrically interconnects (typical internal resistance initialized P600GI is 0,001 ÷ 0,002 Ω). P600GI installation can be done inside buildings, in damp and underground spaces. P600GI functional part is made using a special gas dischage tube with shortened response time 20 nsec, designed for lightning current 100 kA (10/350). On the outer insulating cover is used a blue silicone rubber, which is hydrophobic and has excellent resistance against weathering, pollution and UV rays. Mounting bracket, connecting bolts and nuts are made from stainless steel, suitable for connection of conductors with cross section 16-50 mm2 Fe (Cu). The product is delivered with an integrated bracket, allowing direct mounting of P600GI to the protected metal structure (pillar, wall or flange).

Označení P600GI
Klasifikace dle ČSN EN 61643-11 ed.2: 2013
a IEC 61643-11
Typ 1
Stejnosměrné zapalovací napětí UVDC 600 V ÷ 1000   V
Max. trvalé pracovní napětí 50 Hz Uc 255 Vrms
Jmenovitý výbojový proud (8/20) In 100 kA
Impulzní bleskový proud (10/350) Iimp 100 kA
- náboj Q 50 Asec
- specifická energie Ω/R 2500 kJ/Ω
Zhášecí následný proud při Uc Ifi 100 Arms
Ochranná úroveň při při Iimp
     1)
Up < 1 kV
DC výbojový proud, 1 operace 400 A/0,5   sec
AC výbojový proud při 1200 Vrms (TOV)2), 1 operace 300 Arms/0,2 sec
Doba odezvy1) tA < 20 ns
Izolační odpor při 100 VDC Riso > 1 GΩ
Krytí IP62
Pracovní teplota - 40 °C ÷ +   90 °C
Celková výška včetně konzoly h 187 mm
Hmotnost m cca 620 g
Zapouzdření silikonový kaučuk
Životnost min 100 000 hod
Katalogové číslo 50802/I
1) Typická hodnota
2) TOV – Temporary over voltage

Advantages:

1) Product P600GI is maintenance-free, has very little reaction time (20nsec), high insulation resistance (> 1GΩ) and high protective ability. Next is this product resistant against to harsh treatment, acid rain and mechanical damage.

2) To perform diagnostics it is recommended to use measuring instrument G-TESTER (supplier ACER VOLTAGE s. r. o.). This device allows to control the one hand, the DC spark over voltage of the built GDT, then the value of the insulation resistance Riso (from 25VDC up to 1000VDC).